Home > News

DIN-53754 Taber Leather Abrasion Tester

DIN-53754 Taber Leather Abrasion Tester

DIN-53754 Taber Leather Abrasion Tester is suitable for cloth, paper, paint, plywood, leather, floor tile, glass, natural plastic, etc. The test method is that the rotating sample bears a pair of wear wheels and applies a specified load. When the sample rotates, the wear wheel is driven to wear the sample. The weight loss of wear is the difference between the weight of the sample before and after the test.

Taber Abrasion Resistance Tester.jpg

The main technical parameters:

Compliant with standards: DIN-53754, 53799, 53109, TAPPI-T476, ASTM-D3884, I-S05470-1, GB/T5478-2008

1. Test piece: inner diameter (D) 3mm

2. Wear wheel: medium 2"(Max.45mm)(W)1/2"

3. Center distance of wear wheel: 63.5mm

4. The distance between the center of the wear wheel and the test disc: 37~38mm

5. Wear wheel track: outer diameter 3.5"

6. Rotation speed: 60/r/min or adjustable

7. Load: 250, 500, 750

8. Counter: LED 0~999, 9999, distance between test piece and suction port: 3mm10, volume: 43×31×26cm + vacuum cleaner 11, weight: 18kg (excluding vacuum cleaner) 12, power supply: 1f AC 220V, 10A

The taber wear tester can be used for the wear resistance of automobile tires, as well as the wear resistance of leather, cloth, paint, paper, floor tiles, plywood, glass, plastic flooring, natural rubber and other materials. It is independently developed and produced by QINSUN instruments. Domestic experimental equipment can be compared with imported taber products, with high cost performance and complete after-sales service. Customers in need are welcome to inquire.