Product Introduction:
Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of automobile wires to determine the wear resistance of automobile wires
Applicable standards:
JB/T 8139-1999, JIS C3046, JASO D 611 standards
Main parameters:
1） The scraping device moves bidirectional along the wire axis with a stroke greater than 10mm
2） Movement frequency:50——60 cycles/minute
3） Count:4 digits
4） Test times:4 times
5） The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle:90°
6） Sample length: about 750mm sample firmly fixed on a steel anvil
7） Weight: 500, 750, 1000g, 1250g（weight applied to the scraper）
8） Functional: When the needle wears through the insulation and conductor contact, the equipment will stop
Product Introduction:
Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of automobile wires to determine the wear resistance of automobile wires
Applicable standards:
JB/T 8139-1999, JIS C3046, JASO D 611 standards
Main parameters:
1） The scraping device moves bidirectional along the wire axis with a stroke greater than 10mm
2） Movement frequency:50——60 cycles/minute
3） Count:4 digits
4） Test times:4 times
5） The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle:90°
6） Sample length: about 750mm sample firmly fixed on a steel anvil
7） Weight: 500, 750, 1000g, 1250g（weight applied to the scraper）
8） Functional: When the needle wears through the insulation and conductor contact, the equipment will stop
