The TABER wear resistance and wear resistance tester can measure the wear resistance and other wear resistance properties of a specimen by measuring the friction effect of a specified wear material at a certain load and motion speed, such as mass loss, thickness loss, and changes in transmittance. The wear wheel has been pre ground using standard methods, and the test results can achieve high consistency.

Applicable scope:

The TABER wear-resistant and wear-resistant tester is suitable for testing the surface wear resistance of flat materials, such as suitcases, carpets, cardboard, clothing, glass, plastic coatings, ceramic tiles, metal coatings, paint, varnish, decorative films, high-pressure films, plastics, textiles, elastic floor mats, traffic paint, anodized layer, blankets, electronic components, decorative panels, wax, labels, leather covers, dental materials, automotive interior decoration, resin, furniture, etc.

Testing standards:

ISO 9352 Plastic Grinding Wheel Method for Determining Wear Resistance

ISO 5470 Determination of wear resistance of rubber or plastic coated fabrics

ISO 7784 Paints and Varnishes - Determination of Wear Resistance - Part 2: Rotary Grinding Rubber Wheel Method

ASTM D1044 Test Method for Surface Wear and Corrosion Resistance of Transparent Plastics

ASTM D3884 Test Method for Wear Resistance of Fabrics

ASTM D4060 Standard test method for determining the wear resistance of organic coatings using an abrasion machine

GB/T 5137.1 Test methods for automotive safety glass Part 1: Mechanical performance testing

QB/T 2726 Leather Physical and Mechanical Tests - Determination of Wear Resistance

DIN 53109 Testing of paper and paperboard - Determination of abrasion resistance by friction wheel method

Instrument features:

Simple and easy-to-use operation panel

Configure LCD display screen to display real-time rotational speed

Configure speed control knob, with adjustable speed of 30-75rpm

The number of wear cycles can be preset, with a setting range of 1-999999 times

The rear arm can be equipped with balance weights to accurately balance the weight of the worn arm, achieving the 125g pressure requirement of ASTM standards, as well as other standards and special pressure requirements of users

The suction wall height of the vacuum pump can be adjusted to meet the testing needs of materials with different thicknesses, efficiently removing debris and improving testing accuracy.