Applicable standards:
QC/T730-2005, SAE-J1128-2005, DIN 72551, IS06722, JASO D 618 and other standards
Main parameters:
1, Applicable wire diameter: less than 15mm
2, Sand belt length counting range :0——999999mm
3, Sand belt walking speed :1500mm/min
4. Rounded corner of sand belt support :3.5mm
5, Test voltage :24V
6, Load :20g/50g/100g/200g（2PCS）/500g/900g/1000g
7, Load support weight :65g（0.63N±0.05N）
8, Sand belt and sample Angle :29°
9, Conductive strip spacing :75mm or 150mm
10, Conductive strip width :10mm
11, Power :200VA/220V 50HZ
12, 80#, 150#, 180#, 400# sanding belt is available
Applicable standards:
QC/T730-2005, SAE-J1128-2005, DIN 72551, IS06722, JASO D 618 and other standards
Main parameters:
1, Applicable wire diameter: less than 15mm
2, Sand belt length counting range :0——999999mm
3, Sand belt walking speed :1500mm/min
4. Rounded corner of sand belt support :3.5mm
5, Test voltage :24V
6, Load :20g/50g/100g/200g（2PCS）/500g/900g/1000g
7, Load support weight :65g（0.63N±0.05N）
8, Sand belt and sample Angle :29°
9, Conductive strip spacing :75mm or 150mm
10, Conductive strip width :10mm
11, Power :200VA/220V 50HZ
12, 80#, 150#, 180#, 400# sanding belt is available
