News

Home > News

Do you know the correct operation of the ozone aging test chamber?

Do you know the correct operation of the ozone aging test chamber?

No matter what machine we buy, we need to understand its operation and use method when we receive it, and the ozone aging test chamber is no exception. After receiving the equipment, install it correctly. When using it, refer to the instructions and operate it accurately, so as to obtain accurate test results. Today, the author will briefly explain the correctness of the ozone aging test box. Operation method:


1. Before starting, check whether there is water in the water tank, if there is no water, add it, and check whether the power sequence is correct, etc.

 uv-carbon-arc-weather-meter.jpg

2. The temperature, humidity and ozone concentration settings of the ozone aging test box can be set by clicking on the desired corresponding point on the main interface to see the adjustment position of the goods, which can also be set through the time setting menu on the touch screen. After setting, click the switch to start the device.

 

3. When dynamic test is required, select the options of loading and stretching, and adjust the speed, exhaust switch, etc., and discharge the ozone to the outside after the test.

 

Fourth, the alarm setting in the box: according to the manual, carry out the PID parameters of temperature, humidity and ozone concentration, and set the upper limit of the alarm parameters in each menu, and the alarm parameters can be set according to actual needs.

 

The above is the correct operation method of the ozone aging test box. I believe that you already know how to operate it through the explanation of the editor. Correct operation of the equipment can ensure the normal operation of the test and reduce the occurrence of accidents, so if the user does not understand anything, he can refer to the manual or consult us to obtain it.


Message