News

Home > News

T270-Taber Rotary Abraser specific introduction

T270-Taber Rotary Abraser specific introduction

T270-Taber Rotary Abraser is mainly used to test the wear resistance of leather and plastic materials. By means of rotary grinding, different types of friction wheels are used to rotate friction on the sample to test the wear resistance of leather and plastic materials.


The T270-Taber Rotary Abraser mainly uses rotary grinding to test the wear resistance of leather and plastic materials by rotating different kinds of friction wheels on the sample. Select standard applicable weight sets to test material properties. Detect weight loss on the outer surface of the sample, such as obvious mechanical damage.


Specifications:


Test piece: outer diameter 108mm, inner diameter 8mm, 3mm (D)


Grinding wheel: diameter is 2"(M*45mm) 1/2"(W)


Wheel center spacing: 63.5mm

Taber Abrasion Resistance Tester.jpg

The distance between the center of the grinding wheel and the test disc: 37~38mm


Rotation speed: 60/72rpm


Severe weight: 250g, 500g, 1000g


Counter: LCD, 0~999.999


Volume: 530 × 320 × 310 + vacuum cleaner


Weight: 18kg (without vacuum cleaner)


Power supply: 1φ, 220v/50HZ


Calculation formula of wear index: wear loss weight / formula number of revolutions × 100


The above is the knowledge about T270-Taber Rotary Abraser. Of course, if you want to know more or want to purchase, you are welcome to come and consult.


Message